Relatório de produção acadêmica da Universidade Federal de São Carlos (UFSCar)
Departamento de Engenharia Mecânica (DEMec)

Centro de Ciências Exatas e de Tecnologia (CCET)
Campus São Carlos

Plataforma Lattes / outubro de 2020

Artigos completos publicados em periódicos


Número total de itens: 72

2020

1.   Antonialli, Armando Ítalo Sette; CARVALHO, MARTA REGINA DELLE DONNE ; Diniz, Anselmo Eduardo. On the machinability of the Ni-30 high-temperature iron-based superalloy. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (ONLINE). v. 42, p. 503-513, issn: 1806-3691, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   BARBOSA, G. F.; SHIKI, S. B. ; SILVA, I. B.. R. CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS. v. 1, p. 1-15, issn: 1063-293X, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
3.   CARVALHO, MARTA REGINA DELLE DONNE ; Antonialli, Armando Ítalo Sette ; Diniz, Anselmo Eduardo. A machinability evaluation based on the thermal and mechanical properties of two engine valve steels. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (INTERNET). v. 110, p. 3209-3219, issn: 1433-3015, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
4.   CRUZ, DENNIS COELHO ; SORDI, VITOR LUIZ ; VENTURA, CARLOS EIJI HIRATA. Surface analysis of WC-5%Co cemented tungsten carbide cutting insert after plunge-face grinding. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 108, p. 323-330, issn: 0268-3768, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
5.   GALARZA, FAUSTO ANDRÉS MALDONADO ; DE ALBUQUERQUE, MARCOS VIEIRA ; Antonialli, Armando Ítalo Sette ; Pederiva, Robson ; Diniz, Anselmo Eduardo. Design and experimental evaluation of an impact damper to be used in a slender end mill tool in the machining of hardened steel. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 106, p. 2553-2567, issn: 0268-3768, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
6.   LOPES, JOSÉ CLAUDIO ; RIBEIRO, FERNANDO SABINO FONTEQUE ; JAVARONI, RAFAEL LIBERATTI ; GARCIA, MATEUS VINICIUS ; VENTURA, CARLOS EIJI HIRATA ; SCALON, VICENTE LUIZ ; DE ANGELO SANCHEZ, LUIZ EDUARDO ; DE MELLO, HAMILTON JOSÉ ; AGUIAR, PAULO ROBERTO ; BIANCHI, EDUARDO CARLOS. Mechanical and thermal effects of abrasive cut-off applied in low and medium carbon steels using aluminum oxide cutting disc. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 109, p. 1319-1331, issn: 0268-3768, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
7.   MAGALHÃES, F.C. ; VENTURA, C.E.H. ; ABRÃO, A.M. ; DENKENA, B.. Experimental and numerical analysis of hard turning with multi-chamfered cutting edges. Journal of Manufacturing Processes. v. 49, p. 126-134, issn: 1526-6125, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
8.   NUNES, VICTOR ABREU ; BARBOSA, GUSTAVO FRANCO. Simulation-based analysis of AGV workload used on aircraft manufacturing system: a theoretical approach. ACTA SCIENTIARUM. TECHNOLOGY (ONLINE). v. 42, p. e47034-10, issn: 1807-8664, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
9.   PAGANIN, L. C. ; BARBOSA, G. F.. A comparative experimental study of additive manufacturing feasibility faced to injection molding process for polymeric parts. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 109, p. 2663-2677, issn: 0268-3768, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
10.   PARIS, D. ; PIVOTTO, L.B. ; VENTURA, C.E.H. ; ANTONIALLI, A.Í.S.. Influence of built up edge on the surface topography of Ti-15Mo. PROCEDIA CIRP. v. 87, p. 137-141, issn: 2212-8271, 2020.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2019

1.   BARBOSA, GUSTAVO FRANCO ; Shiki, Sidney Bruce ; SAVAZZI, JOSÉ OTÁVIO. Digitalization of a standard robot arm toward 4th industrial revolution. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (INTERNET). v. 105, p. 2707-2720, issn: 1433-3015, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   BARBOSA, GUSTAVO FRANCO; DE ANDRADE BEZERRA, WILLIAN. A knowledge tailor-made method oriented to robotization of process: a case study of aeronautical materials’ drilling. Journal of the Brazilian Society of Mechanical Sciences and Engineering. v. 41, p. 168-182, issn: 1678-5878, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
3.   BARIONI JUNIOR, W. ; COLNAGO, L. A. ; FERRO, C. ; OLIVEIRA, M. C. N. ; SANTOS, A. M. ; SELEGUIM JÚNIOR, P. ; ÁVILA, M. T.. Desenvolvimento experimental em motor do ciclo diesel utilizando oleo de soja como combustível. Boletim de Pesquisa e Desenvolvimento (Embrapa Pecuária Sudeste. Online). v. 46, p. 1-83, issn: 1981-2078, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
4.   BRAZ, C. O. ; VENTURA, C. E. H. ; DE OLIVEIRA, M. C. B. ; ANTONIALLI, A. Í. S. ; ISHIKAWA, T.. Investigating the Application of Customized Abrasive Cutoff Wheels with Respect to Tool Wear and Subsurface Integrity in Metallographic Cutting of Pure Titanium. METALLOGRAPHY, MICROSTRUCTURE, AND ANALYSIS (PRINT). v. 8, p. 826-832, issn: 2192-9262, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
5.   COLOMBO, FERNANDA THAÍS ; de Carvalho Fontes, João Vitor ; DA SILVA, MAÍRA MARTINS. A Visual Servoing Strategy Under Limited Frame Rates for Planar Parallel Kinematic Machines. JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS (DORDRECHT. ONLINE). v. 92, p. 1-13, issn: 1573-0409, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
6.   LEAL, CARLOS A. A. ; ABRÃO, ALEXANDRE M. ; BRANDÃO, LINCOLN C. ; VENTURA, CARLOS E. H. ; DENKENA, BEREND ; BREIDENSTEIN, BERND. Chamfer texturing of tungsten carbide inserts applied to turning of grey cast iron. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (INTERNET). v. 104, p. 4655-4664, issn: 1433-3015, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
7.   LETÍCIA LOPES TITO, ANA ; ÍTALO SETTEANTONIALLI, ARMANDO ; Bolfarini, Claudemiro. Mechanical testing and biomechanical numerical simulation of stainless steel and titanium alloy bone plates used on tibial fracture treatment. Journal of Mechanical Engineering and Biomechanics. v. 4, p. 62-68, issn: 2456-219X, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
8.   LOPES, JOSÉ C. ; VENTURA, CARLOS E. H. ; DE M. FERNANDES, LUCAS ; TAVARES, ANDRÉ B. ; SANCHEZ, LUIZ E. A. ; DE MELLO, HAMILTON J. ; DE AGUIAR, PAULO R. ; BIANCHI, EDUARDO C.. Application of a wheel cleaning system during grinding of alumina with minimum quantity lubrication. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 102, p. 333-341, issn: 0268-3768, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
9.   LOVO, JOÃO FIORE PARREIRA ; CAMARGO, ITALO LEITE DE ; ARAUJO, LUIS ANTONIO OLIVEIRA ; FORTULAN, CARLOS ALBERTO. Mechanical structural design based on additive manufacturing and internal reinforcement. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE. v. 233, p. 095440621987847, issn: 0954-4062, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
10.   MAGALHAES, F. ; VENTURA, C. E. H. ; Abrão, A.M. ; DENKENA, B. ; BREIDENSTEIN, B. ; Meyer, K.. Prediction of surface residual stress and hardness induced by ball burnishing through neural networks. INTERNATIONAL JOURNAL OF MANUFACTURING RESEARCH (PRINT). v. 14, p. 295-310, issn: 1750-0591, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
11.   PERISSINI, I. C. ; APPEL, V. C. R. ; REZENDE, M. B. ; PEDRO, L. M. ; CAURIN, G. A. P.. Comparison of hand segmentation approaches in grasp images obtained with an omnidirectional vision system.. Journal of Mechanical Engineering and Biomechanics. v. 4, p. 22-28, issn: 2456-219X, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
12.   ZANCHETA, B. D. ; SILVA, V. K. ; SORDI, V. L. ; RUBERT, J. B. ; KLIAUGA, A. M.. Effect of asymmetric rolling under high friction coefficient on recrystallization texture and plastic anisotropy of AA1050 alloy. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA. v. 29, p. 2262-2272, issn: 1003-6326, 2019.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2018

1.   ARAUJO, LUIS ANTONIO OLIVEIRA; ROLLO, J.M.D.A. ; FOSCHINI, C.R. ; FORTULAN, CARLOS ALBERTO. Study of Abrasive Cutting of Natural Quartz for Manufacturing Piezoelectric Power Generators. MATERIALS SCIENCE FORUM (ONLINE). v. 912, p. 234-239, issn: 1662-9752, 2018.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   LOPES, JOSÉ C. ; VENTURA, CARLOS E. H. ; RODRIGUEZ, RAFAEL L. ; TALON, ANTHONY G. ; VOLPATO, ROBERTA S. ; SATO, BRUNO K. ; DE MELLO, HAMILTON J. ; DE AGUIAR, PAULO R. ; BIANCHI, EDUARDO C.. Application of minimum quantity lubrication with addition of water in the grinding of alumina. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 97, p. 1951-1959, issn: 0268-3768, 2018.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
3.   MAGALHÃES, DANIELLE CRISTINA CAMILO ; KLIAUGA, A. M. ; FERRANTE, M. ; SORDI, VITOR LUIZ. Asymmetric cryorolling of AA6061 Al alloy: Strain distribution, texture and age hardening behavior. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. v. 736, p. 53-60, issn: 0921-5093, 2018.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
4.   MAGALHÃES, DANIELLE CRISTINA CAMILO ; PRATTI, ALLANA LAUREN ; KLIAUGA, ANDREA MADEIRA ; Rubert, José Benaque ; Ferrante, Maurizio ; Sordi, Vitor Luiz. Numerical simulation of cryogenic cyclic closed-die forging of Cu: hardness distribution, strain maps and microstructural stability. Journal of Materials Research and Technology-JMR&T. v. xx, p. 2018.02.005, issn: 2238-7854, 2018.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
5.   MORAES, A. A. U. de; GUIDETTI, G. E. C. B. ; ALVES, A. B. C. G.. AVALIAÇÃO DO CONSUMO ENERGÉTICO DE DOIS SISTEMAS DISTINTOS DE CLIMATIZAÇÃO EM UM RESTAURANTE NA CIDADE DE UBERABA-MG VIA ENERGY PLUS. REVISTA BRASILEIRA DE CIÊNCIA, TECNOLOGIA E INOVAÇÃO. v. 3, p. 17-31, issn: 2359-4748, 2018.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
6.   NARDIN, F. L. ; PAZIANI, F. T. ; Watanabe, F. Y. ; AROCA, R. V.. Desenvolvimento de material didático para uso em aulas práticas de metrologia industrial. PRINCIPIA (JOÃO PESSOA). v. 39, p. 46-53, issn: 1517-0306, 2018.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
7.   VENTURA, CARLOS EH; BREIDENSTEIN, BERND ; DENKENA, BEREND. Influence of customized cutting edge geometries on the workpiece residual stress in hard turning. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. v. 232, p. 2132-2139, issn: 0954-4054, 2018.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2017

1.   Aroca, R. V. ; VENTURA, C. E. H. ; MELLO, I. ; Pazelli, T. F. P. A. T.. Sequential additive manufacturing: automatic manipulation of 3D printed parts. RAPID PROTOTYPING JOURNAL. v. 23, p. 653-659, issn: 1355-2546, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   BARBOSA, G. F.; TIBURTINO, E. B. ; CARVALHO, J.. A human factors methodology tailor-made for aeronautical design aimed to maintenance routines. Journal of the Brazilian Society of Mechanical Sciences and Engineering. v. 39, p. 497-507, issn: 1678-5878, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
3.   BUSSETTA, P. ; SHIKI, S. B. ; da SILVA, S.. Updating of a nonlinear finite element model using discrete-time Volterra series. Latin American Journal of Solids and Structures. v. 14, p. 1183-1199, issn: 1679-7825, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
4.   BUSSETTA, PHILIPPE ; Shiki, Sidney Bruce ; DA SILVA, SAMUEL. Nonlinear updating method: a review. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (ONLINE). v. 1, p. 1-11, issn: 1806-3691, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
5.   FRANCO BARBOSA, GUSTAVO; VIDAL AROCA, RAFAEL. Advances of Industry 4.0 Concepts on Aircraft Construction: An Overview of Trends. Journal of Steel Structures & Construction. v. 03, p. 1-8, issn: 2472-0437, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
6.   FRANCO, V.R.; VAROTO, P.S.. Parameter uncertainties in the design and optimization of cantilever piezoelectric energy harvesters. Mechanical Systems and Signal Processing. v. 93, p. 593-609, issn: 0888-3270, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
7.   GF, BARBOSA; AC, HERNANDES ; S, LUZ ; J, BATISTA ; VA, NUNES ; M, BECKER. A Conceptual Study Towards Delivery of Consumable Materials to Aircraft Assembly Stations Performed by Mobile Robots Based on Industry 4.0 Principles. Journal of Aeronautics & Aerospace Engineering. v. 06, p. 1-11, issn: 2168-9792, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
8.   GF, BARBOSA; RV, AROCA. An IoT-Based Solution for Control and Monitoring of Additive Manufacturing Processes. Journal of Powder Metallurgy & Mining. v. 06, p. 1-7, issn: 2168-9806, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
9.   MAGALHÃES, D C ; KLIAUGA, A. M. ; FERRANTE, M. ; SORDI, V L. Microstructure, accumulated strain, and mechanical behavior of AA6061 Al alloy severely deformed at cryogenic temperatures. IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING (PRINT). v. 194, p. 012027, issn: 1757-8981, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
10.   MAGALHÃES, DANIELLE CRISTINA CAMILO ; KLIAUGA, A. M. ; FERRANTE, M. ; SORDI, VITOR LUIZ. Plastic deformation of FCC alloys at cryogenic temperature: the effect of stacking-fault energy on microstructure and tensile behaviour. Journal of Materials Science. v. 52, p. 979, issn: 0022-2461, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
11.   VENTURA, C. E. H.; CHAVES, HEITOR S. ; Campos Rubio, J. C. ; Abrão, A.M. ; DENKENA, B. ; BREIDENSTEIN, B.. The influence of the cutting tool microgeometry on the machinability of hardened AISI 4140 steel. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 90, p. 2557-2565, issn: 0268-3768, 2017.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2016

1.   ANTONIALLI, A. Í. S.; MAGRI, A. ; DINIZ, A. E.. Tool life and tool wear in taper turning of a nickel-based superalloy. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 1, p. 1-10, issn: 0268-3768, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   ARAUJO, L. A. O.; FOSCHINI, C. R. ; JASINEVÍCIUS, R. G. ; FORTULAN, C. A.. Precision dicing of hard materials with abrasive blade. International Journal, Advanced Manufacturing Technology. v. 82, p. 1-10, issn: 0268-3768, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
3.   BARBOSA, GUSTAVO FRANCO; SAVAZZI, JOSÉ OTÁVIO. INFLUENCY OF CUTTING TOOL’S ANGLE ON MILLING OF COMPOSITE MATERIALS PERFORMED BY ROBOTS. Brazilian Journal of Operations and Production Management. v. 13, p. 226-231, issn: 2237-8960, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
4.   BIDINOTTO, J. H.; KLEINUBING, M. ; CATALANO, F. M. ; BELO, E. M.. Termografia Aplicada à Visualização de Transição de Camada Limite em Aerofólios. SEMINA. CIÊNCIAS EXATAS E TECNOLÓGICAS (ONLINE). v. 37, p. 143-158, issn: 1679-0375, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
5.   CORDEIRO, E. C. ; BARBOSA, G. F. ; TRABASSO, L. G.. A customized QFD (quality function deployment) applied to management of automation projects. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. v. 87, p. 2427-2436, issn: 0268-3768, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
6.   FRIGO, MAURICIO A. ; SILVA, ETHEL C. C. DA ; BARBOSA, GUSTAVO F.. Augmented Reality in Aerospace Manufacturing: A Review. Journal of Industrial and Intelligent Information. v. 4, p. 125-130, issn: 2301-3745, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
7.   ROCHA, A. C. P. ; TUDELLA, E. ; PEDRO, L. M. ; APPEL, V. C. R. ; SILVA, L. G. P. ; CAURIN, G. A. P.. A Novel Device for Grasping Assessment during Functional Tasks: Preliminary Results. Frontiers in Bioengineering and Biotechnology. v. 4, p. 1-10, issn: 2296-4185, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
8.   SHIKI, S. B.; da SILVA, S. ; TODD, M. D.. On the application of discrete-time Volterra series for the damage detection problem in initially nonlinear systems. Structural Health Monitoring. v. 16, p. 62-78, issn: 1475-9217, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
9.   SORDI, VITOR L. ; MENDES FILHO, ANIBAL A. ; VALIO, GUSTAVO T. ; SPRINGER, PHILLIP ; RUBERT, JOSE B. ; Ferrante, Maurizio. Equal-channel angular pressing: influence of die design on pressure forces, strain homogeneity, and corner gap formation. Journal of Materials Science (Dordrecht. Online). v. 51, p. 2380-2393, issn: 1573-4803, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
10.   VENTURA, C.E.H. ; AROCA, R.V. ; ANTONIALLI, A.Í.S. ; ABRÃO, A.M. ; RUBIO, J.C. CAMPOS ; CÂMARA, M.A.. Towards Part Lifetime Traceability Using Machined Quick Response Codes. Procedia Technology. v. 26, p. 89-96, issn: 2212-0173, 2016.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2015

1.   BARBOSA, GUSTAVO FRANCO; DE SOUZA, CARLOS HENRIQUE PEREIRA. ADVANTAGES REACHED BY REPLACEMENT OF 2D TO 3D PROGRAMMING TO AIM MACHINABILITY OF PRIMARY PARTS. Brazilian Journal of Operations and Production Management. v. 12, p. 116-123, issn: 1679-8171, 2015.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   BIDINOTTO, J. H.; BELO, E. M.. Modal Shape Analysis Using Thermal Imaging. Journal of Aerospace Technology and Management (Online). v. 7, p. 185-192, issn: 2175-9146, 2015.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
3.   SILVA, R.J. ; BARBOSA, G.F. ; CARVALHO, J.. Additive Manufacturing of Metal Parts by Welding. IFAC-PapersOnLine. v. 48, p. 2318-2322, issn: 2405-8963, 2015.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
4.   TITA, V. ; DE MEDEIROS, R. ; MARQUES, F. D. ; MORENO, M. E.. Effective properties evaluation for smart composite materials with imperfect fiber-matrix adhesion. Journal of Composite Materials. v. 49, p. 3683-3701, issn: 1530-793X, 2015.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
5.   VENTURA, C.E.H.; KÖHLER, J. ; DENKENA, B.. Influence of cutting edge geometry on tool wear performance in interrupted hard turning. Journal of Manufacturing Processes. v. 19, p. 129-134, issn: 1526-6125, 2015.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
6.   WATANABE, F. Y.; FRANCISCO, C. A. ; FRANÇA, C. A. ; OGASHAWARA, O.. A Questão do Gênero na Engenharia e as Iniciativas para a Formação de Mais Engenheiras. Revista Eletrônica Engenharia Viva. v. 1, p. 51, issn: 2358-1271, 2015.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2014

1.   DENKENA, B. ; KÖHLER, J. ; BREIDENSTEIN, B. ; ABRÃO, A.M. ; VENTURA, C.E.H.. Influence of the cutting edge preparation method on characteristics and performance of PVD coated carbide inserts in hard turning. Surface & Coatings Technology. v. 254, p. 447-454, issn: 0257-8972, 2014.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   DENKENA, B. ; KÖHLER, J. ; VENTURA, C.E.H.. Influence of grinding parameters on the quality of high content PCBN cutting inserts. Journal of Materials Processing Technology. v. 214, p. 276-284, issn: 0924-0136, 2014.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
3.   DENKENA, B. ; KÖHLER, J. ; VENTURA, C.E.H.. Grinding of PCBN cutting inserts. International Journal of Refractory & Hard Metals (Cessou em 1988. Cont. 0958-0611 International Journal of Refractory Metals & Hard Materials). v. 42, p. 91-96, issn: 0263-4368, 2014.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
4.   SORDI, V. L. ; Mendes Filho, A.A. ; Valio, G.T. ; SPRINGER, P. ; RUBERT, J. B. ; FERRANTE, M.. Experimental and FEM Studies of the Relationships between Equal-Channel Angular Pressing Die Design, Strain Distribution and Pressing Forces. Advanced Materials Research (Online). v. 922, p. 507-512, issn: 1662-8985, 2014.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
5.   VENTURA, C.E.H.; KÖHLER, J. ; DENKENA, B.. Strategies for grinding of chamfers in cutting inserts. Precision Engineering. v. 38, p. 749-758, issn: 0141-6359, 2014.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2013

1.   ARISTIZABAL, SERGIO LOPERA ; CIRINO, GIUSEPPE ANTONIO ; MONTAGNOLI, ARLINDO NETO ; SOBRINHO, APARECIDO ARRUDA ; RUBERT, JOSE BENAQUE ; HOSPITAL, MICHEL ; MANSANO, RONALDO DOMINGUES. Microlens array fabricated by a low-cost grayscale lithography maskless system. Optical Engineering (Bellingham. Print). v. 52, p. 125101, issn: 0091-3286, 2013.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   CAMPANELLI, LEONARDO CONTRI ; Antonialli, Armando Ítalo Sette ; ALCÂNTARA, NELSON GUEDES DE ; Bolfarini, Claudemiro ; SUHUDDIN, UCEU FUAD HASAN ; SANTOS, JORGE FERNANDEZ DOS. LAP SHEAR TEST OF A MAGNESIUM FRICTION SPOT JOINT: NUMERIC MODELING. Tecnologia em Metalurgia, Materiais e Mineração (Impresso). v. 10, p. 97-102, issn: 2176-1515, 2013.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
3.   Messner, R.S. ; Itman Filho, A. ; RUBERT, J. B.. LAMINAÇÃO A FRIO DE FIOS ORTODÔNTICOS DE AÇO INOXIDÁVEL AUSTENÍTICO AISI 304. Tecnologia em Metalurgia, Materiais e Mineração (Impresso). v. 10, p. 57-63, issn: 2176-1515, 2013.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
4.   PEDRO, L. M.; BELINI, V. L. ; CAURIN, G. A. P.. Learning how to grasp based on neural network retraining. Advanced Robotics (Print). v. 27, p. 1-13, issn: 0169-1864, 2013.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
5.   SPRINGER, PHILLIP ; Rubert, José Benaque ; Sordi, Vitor Luiz ; Ferrante, Maurizio. DESENVOLVIMENTO POR SIMULAÇÃO COMPUTACIONAL E ANÁLISE DO DESEMPENHO REAL DE UMA MATRIZ PARA EXTRUSÃO EM CANAL ANGULAR. Tecnologia em Metalurgia, Materiais e Mineração (Impresso). v. 10, p. 120-127, issn: 2176-1515, 2013.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
6.   STÜCHELI, MARIUS ; CAURIN, GLAUCO A. P. ; Pedro, Leonardo M. ; SIEGWART, ROLAND Y.. Squeezed screw trajectories for smooth regrasping movements of robot fingers. Journal of the Brazilian Society of Mechanical Sciences and Engineering (Impresso). v. 1, p. 1-10, issn: 1678-5878, 2013.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2012

1.   Di Giacomo, B. ; SILVA, R. J. ; PAZIANI, F.T.. Sistema automatizado e dedicado para medir diâmetros internos. Maquinas e Metais. v. 560, p. 136-149, issn: 0025-2700, 2012.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   MEDEIROS, R. ; MORENO, M. E. ; MARQUES, F. D. ; TITA, V.. Effective properties evaluation for smart composite materials. Journal of the Brazilian Society of Mechanical Sciences and Engineering (Impresso). v. 34, p. 362-370, issn: 1678-5878, 2012.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2011

1.   Mendes Filho, Anibal de Andrade ; Prados, Erika Fernanda ; Valio, Gustavo Trindade ; RUBERT, J. B. ; Sordi, Vitor Luiz ; Ferrante, Maurizio. Severe plastic deformation by equal channel angular pressing: product quality and operational details. Materials Research (São Carlos. Impresso). v. 14, p. 335-339, issn: 1516-1439, 2011.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]

2008

1.   Mendes Filho, A. A. A. ; SORDI, V. L. ; RUBERT, J. B. ; FERRANTE, M.. The Influence of ECAP Die Channel Geometry on Shear Strain and Deformation Uniformity. Materials Science Forum. v. 586, p. 145-150, issn: 0255-5476, 2008.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]
2.   Navarro, H. A. ; Kaibara, M. K. ; RUBERT, J. B. ; MONTAGNOLI, A. N. ; Cabezas-Gómez, L. ; SILVA, R. C.. Wavelet-Galerkin method for one-dimensional elastoplasticity and damage problems: constitutive modeling and computational aspects.. Applied Mathematics and Computation. v. 198, p. 904-915, issn: 0096-3003, 2008.
[ citações Google Scholar | citações Microsoft Acadêmico | busca Google ]


Data de processamento: 12/10/2020 22:48:17